CheckMate Lasers: Putting the industry in check!

"The BEST and MOST AFFORDABLE Laser System Ever Made!"
Engineered to take the best of many existing laser systems innovative but poorly implemented features and enhance them to develop a laser system that works around you, not you having to work around it. From the factory removable table to allow for nearly unlimited height engraving, to the lighting system that always illuminates your work piece where the lens and laser beam are actually working, to the simple but effective project test mode to ensure projects are perfectly lined up with substrates and many other highly useful but simple features. In its simplistic approach this laser system is equipped with features designed to boost overall productivity at an affordable price!

THE LASER SYSTEM BY WHICH ALL ARE MEASURED!
Standard features include: Set Home Origin, FULL Pass-Thru (Front/Rear Panels or Side by Side), Red Diode Focal Tool, Project Test Mode, Internal LED Lighting, Removable Doors, Emergency Stop, Slat Table, Programmable Origin, DEEP Table, HUGE Work Area, HIGH Wattage, Air Assist, Easy Laser Tube Upgrade, User Friendly Control Panel, High Speed Reliable Motion System, Advanced Vector Modes, Intelligent Rubber Stamp Engraving, Multiple/single job selection. NOTE: These are standard features that the others SOMETIMES if even available provide at a price, ours is included! Find out why CheckMate Lasers can confidently and boldly state these are "The BEST and MOST AFFORDABLE Laser System Ever Made!"

XM8 Model	BISHOP2
HIGH Laser Power	50 watt	60 watt
Laser Source	Glass CO2 laser tube
12"x24" Engraving Area	30 x 60cm \| 11.81 X 23.62in
FULL width Pass-Thru	ANY Width x 11.81in Length x 13.75in deep!
Communication Interface	USB 2.0
Engraving Speed	63in/s \| 1600mm/s
Work table max. DEPTH	350mm \| 13.75in (motorized)
Motorized Auto Focus	Yes (dual red diode pointers)
Lens manual adjust range	28mm \| 1.1in
Table is removable?	Optional from factory (allows for nearly unlimited clearance)
Without table depth	Clearance with table removed = 876mm \| 34.5"
Optional stand	Yes / without table + optional stand clearance = 123mm \| 48"
Minimum shaping character	1 x 1mm \| 0.04 x 0.04in
Resolution Ratio	0.0254mm \| 0.001in (1000dpi)
Resetting Position	Accuracy less than or equal to 0.01mm \| 0.004in
Power Supply	220v +/-10% 50Hz
110V compatible	50w YES - 110v +/-10% 60Hz / HIGHLY discouraged @ 60w+
Power Consumption	1200W
Operating Temperature	0°-45°C \| 32°-113°F
Operating Humidity	35°-70°C \| 95°-158°F
Software Supported	Direct output: XM8draw*, CorelDRAW, AutoCAD (CDR & AC interface require select versions)
Graphic Format Supported	Vector format: DXF/AI/PLT/DST Bitmap format: JPG/TIF/PCX/PNG/TGA
Operating System Supported	Windows 2000/XP/Vista/7
32-bit or 64-bit Support	Yes / 32-bit or 64-bit Hardware & Operating System
Cylindrical object engraving	Yes (with optional rotary attachment)
System safety rating	Class I laser, Class III with red pointer
Exhaust Ventilation	Exhaust blower requires outdoor access
Air Assist	Yes, plumbing standard (compressor required)
Cooling Method	Water Cooled
Water Circulator	Required (optional chiller recommended)
Laser Tube Life	1500 hours = Approximately one (1) year
Laser System Warranty	24 months
Laser Tube Warranty	Three (3) months
Optics Warranty	Three (3) months
Onsite installation & training	Yes, included (travel expenses included)
Equipment Dimensions	110 x 70 x 98cm \| 44 x 28 x 39in
Shipping Weight	200KG \| 440.92lb
Shipping Dimensions	134 x 85 x 100cm \| 53 x 34 x 40in

Specifications subject to change without notice. Images may differ from actual shipping product.